Eaton 2520vqsv10 Vickers Triple Hydraulic Vane Pump

• After-sales Service: Technical Support, Any Problem Replace New
• Warranty: 12 Months
• Acting Form: Single-Acting
• Model NO.: 2520VQSV10 3520VQSV10 3525VQSV10
• Type: Vane Pump
• Displacement: Dosing Pumps
• Performance: No Leak
• Certification: CE, ISO
• Pressure: High Pressure
• Shaft: Spline&Key
• Quality: High Quality Level
• Transport Package: Foam Packing Within Wooden Pallet
• Specification: 0.02CBM
• Trademark: BEHYD/SAIYI
• Origin: Taizhou
• HS Code: 8413603190
• Production Capacity: 20000PCS/Month

Product Description

 

Product Description

                                                     Eaton 2520VQSV10 Vickers Triple Hydraulic Vane Pump
This series vane pump models include: 4525VQ-S-V10-F-17-A-8-T, 2520VQ-S-V10-F-17-A-8-T, 3525-S-V10-F-17-A-8-T, 4535VQ-S-V10-F-17-A-8-T; F3-4525VQ-S-V10-F-17-A-8-T, F3-2520VQ-S-V10-F-17-A-8-T, F3-3525VQ-S-V10-F-17-A-8-T, F3-4535VQ-S-V10-F-17-A-8-T.
This triple vane pump are with high performance and high pressure which designed for constraction machinery especially for mobile machinery.

Installation and Use:

1. In installation, the tolerance of concentricity between shaft of pump and motor must be less than 0.10mm (TIR) by using the flexible coupling; The pump shaft shall not bear the radial and axial load ; The carrier must be firm with good rigidity and can fully absorb vibrations.
2. Set the suction pressure at pump inlet port : Recommended inlet pressure is 0 to 35Kpa.
3. Oil should be kept clean, pipes and tanks must be thoroughly cleaned; The cleanness level of oil should be within NSA12.
4. Nomal pump operation (at rated conditions)is based on the use of SAE10W oil in the 38 ºC to 82 ºC range (or comparable viscosities)
5. Check the inlet, outlet and direction of rotation before starting the pump. Turn the shaft of pump evenly and nimbly by hand after fixing the pump. At the time of first-starting ,if the pump does not immediately prime , air should be bled from the pump delivery line .
6. When first put into use, the pump body and oil suction pipeline should be filled with oil, and the pump shall not be allowed to operate without oil.
7. Do not start the pump when the outlet pressure is lower than the inlet pressure. This will cause work noise and blade instability.
8. Cold start condition:When operating SAE10W oil in the 860 to 40cSt range, the speed and pressure should be limited to 50% or less of their respective rated values until the system has warmed up. Extreme caution must be used when starting units when fluid viscosity are greater than 860cSt, Care should be exercised to warm up the entire system, including remote cylinders and motors.
9. At high temperature, viscosities must not be less than 13cSt, Temperatures should not exceed 99 ºC because the expectancy of cartridge kite and elastomers will decrease.

Detailed Photos

 

Product Parameters

 

Related Products

 

Packaging & Shipping

Company Profile

Taizhou  Saiyi  Hydraulic  machinery  Co.,Ltd  is  professional  company  producting  and  designing all  kinds of hydraulic component and  machine  part. The hydraulic component  is  include  hydraulic pumps,hydraulic  valves,hydraulic  motors  and  other  component.
The  machine  part  is  include  the  spare  parts  in  excavator,forklift,truck,wheel  loader … …
Our  products  are  include:V/VQ  Vickers  type  vane  pump,V10/V20/VTM42  vane  pump,T6  denison vane  pump,SQP  Tokimec vane  pump,VP variable vane  pump,50T/150T vane  pump,QT  sumitomo internal  gear  pump,HG  rexroth  internal  gear  pump,SGP1/SGP2/KZP4  Shimadzu/KYB  gear  pump, HGP  gear pump,A2F/A4VIA7V/A10V  Piston  pump.YCY/MCY  piston  pump..
Yuken type valves,Rexroth type valves…BM  Eaton type  Orbit  motor,M series  Radial  piston  motor …
And  also  high  quality  hydraulic  accessories,such  as  accumulator,oil  cooler,hydraulic  unit …
Hydraulics drive the world!We are  having great  passion on  it to  make the world  more  beautiful.
Hope you join us and have a win-win cooperation together.

EXHIBITION SHOW

 

FAQ

Q1:Can you provide a sample to check quality before the big order? 
A:Yes, we can .

Q2:Can I have my brand on the products?
 A:We can give you OEM depend on the quantity.

Q3:How about your quality? 
A:Many industry& mobile machine manufacturers is our customer in China and over the world.
    We test the goods one by one before delivery to confirm the quality.

 Q4: How long has your company run in Hydraulic Fields?
 A:Over 10 years

 Q5: Which payment terms do you accept? 
A:L/C T/T D/A D/P Western Union Paypal Money Gram

Q6: What is your delivery time?
 A:It depends on whether the products you buy is in stock.If in stock, ship it within 1-3days,
      if not, we can discuss and we will arrange your order as soon as possible.

 Q7: What's the warranty of your products? 
A:12 months~18months after shippment.