2gpm2 Tandem External Gear Hydraulic Piston Ar Pressure Washer Pump

• After-sales Service: Technical Support
• Warranty: 12 Months After Receiving Goods
• Mesh Form: External Engaged
• Model NO.: 2gpm2.2
• Tooth Flank: Straight Tooth
• Tooth Curve: Involute
• Power: Hydraulic
• Type: Normal Line Gear Pump
• Applications: Machinery Manufacturing
• Aircraft Engines: Increase
• Torque: High
• Service Life: Long
• High: Cost Performance
• Transport Package: Carton Box+Pallet
• Specification: 2.5kgs
• Trademark: BEHYD
• Origin: Taizhou
• HS Code: 8483409000
• Production Capacity: 50000PCS/Month
• Package Size: 120.00cm * 80.00cm * 135.00cm
• Package Gross Weight: 30.000kg
• Lead Time: 15 days (1 - 50 Pieces) ; To be negotiated ( > 50 Pieces)

Product Description

Product Description

2GPM2 Tandem Gear Pump

BASIC DESIGN

 

External gear pumps are the most popular pumps used in modern hydraulic systems.

Their features are versatility, strength and long useful life.

The simple construction ensures limited purchase costs and servicing. Thanks to there basic concepts, together with ever-improving product design and features, research-based on many years of experience, accuracy in material selection, producing process followed in great detail and tests on mass-produced parts, our gear pumps have reached top quality standards.

For this reason, our products can work under heavy operating conditions and transmit high hydraulic power. Furthermore,gear pumps feature good hydraulic, mechanical and volumetric efficiency, low noise lever and, last but not least, compact dimensions.

SAIYI HYDRAULIC gear pumps has further developed its own range of products with a new series of pumps named GPM where groups names 1P, 1A, GPM0.0, GPM1.0,  GPM2.0, GPM2.6, GPM3.0 are suitable for the most different applications in both industrial, mobile, marine and aerospace industries.

Generally these gear pumps, usually consist of a gear pair supported by two aluminum bushes, a body, a securing flange and a cover. Shaft of the driving gear projecting beyond the flange mounts a twin-lip seal ring (the inner lip being a seal and the outer being a dust seal). An elastic securing ring secures the ring in place. The body of the pump is made of special hi-resistant aluminum alloy obtained through extrusion process, while flange and cover are made out of spheroidal cast iron, this in order to ensure minimized deformation even when subject to high pressure, be it continuous or intermittent or peak pressure.

Gears are made of special steel. Their manufacturing process ground and fine finished so to have a high degree of surface ensure low pulsation levers and low noise levers during pump operation.

Bushings are made of special low-friction and hi-resistant aluminum alloy and manufactured from die-casting. Besides they are equipped with antifriction DU bearings.

Special compensation zones onto bushings, insulated by special preformed seals with anti-extrusion ring, allow fully free axial and radial movement to the bushes, which is proportional to pump operating pressure. In this way, internal dripping is dramatically reduced, thus ensuring very good pump performance (both in terms of volume and in general) and proper lubrication of pump moving parts.

Product Parameters

 

NSTALLATION NOTES  

Before starting the system on a continuous basis, we suggest to adopt some simple precautions:

l Check for the direction of rotation of the pump to be consistent with the drive shaft one.

l Check for the proper alignment of pump shaft and motor shaft: it is necessary that the connection does not include axial or radial loads.

l Protect drive shaft seal during pump painting. Check if contact area between seal ring and shaft is clean: dust could provoke quicker wear and leakage.

l Remove all dirt, chips and all foreign bodies from flanges connecting inlet and delivery ports.

l Ensure that intake and return pipes ends are always below fluid lever and as far from each other as possible.

l Install the pump below head, if possible.

l Fill the pump with fluid, and turn it by hand.

l Disconnect pump drain during startup to bleed air off the circuit.

l At first startup, set pressure limiting valves at min. value possible.

l Avoid lower rotation speed than min. allowed with pressure higher than continuous max. pressure.

l Do not start the system at low temperatures under load conditions or after long stops (always avoid or limit load starting for pump longer life).

l Start the system for a few minutes and turn on all components; bleed air off the circuit to check its proper filling.

l Check fluid lever in the tank after loading all components.

l At last, gradually increase pressure, continuously check fluid and moving parts temperature, check rotation speed until you reach set operating values that shall be within the limits indicated in this catalogue.

Hydraulic Fluid  

 

Use specific mineral oil based hydraulic fluids having good anti-wear, anti-foaming, antioxidant, anti-corrosion and lubricating properties. Fluids should also comply with DIN51525 and VDMA 24317 standards and get through 11th stage of FZG test.

For the standard models, the temperature of the fluid should not be between -10ºC and +80ºC.

 

Fluid kinematic viscosity ranges are the following:

Allowed Value	6÷500 cSt
Recommended value	10÷100 cSt
Value allowed at startup	<2000 cSt

 

Detailed Photos

 

Company Profile

Taizhou  Saiyi  Hydraulic  machinery  Co.,Ltd  is  professional  company  producting  and  designing all  kinds of hydraulic component and  machine  part since 2003. The hydraulic component  is  include  hydraulic pumps,hydraulic  valves,hydraulic  motors  and  other  component.
The  machine  part  is  include  the  spare  parts  in  excavator,forklift,truck,wheel  loader … …
Our  products  are  include:V/VQ  Vickers  type  vane  pump,V10/V20/VTM42  vane  pump,T6  denison vane  pump,SQP  Tokimec vane  pump,VP variable vane  pump,50T/150T vane  pump,QT  sumitomo internal  gear  pump,HG  rexroth  internal  gear  pump,SGP1/SGP2/KZP4  Shimadzu/KYB  gear  pump, HGP  gear pump,A2F/A4VIA7V/A10V  Piston  pump.YCY/MCY  piston  pump..
Yuken type valves,Rexroth type valves…BM  Eaton type  Orbit  motor,M series  Radial  piston  motor …
And  also  high  quality  hydraulic  accessories,such  as  accumulator,oil  cooler,hydraulic  unit …
Hydraulics drive the world!We are  having great  passion on  it to  make the world  more  beautiful.
Hope you join us and have a win-win cooperation together.

EXHIBITION SHOW

Packaging & Shipping

 

FAQ

Q1:Can you provide a sample to check quality before the big order? 
A:Yes, we can .

Q2:Can I have my brand on the products?
 A:We can give you OEM depend on the quantity.

Q3:How about your quality? 
A:Many industry& mobile machine manufacturers is our customer in China and over the world.
    We test the goods one by one before delivery to confirm the quality.

 Q4: How long has your company run in Hydraulic Fields?
 A:Over 10 years

 Q5: Which payment terms do you accept? 
A:L/C T/T D/A D/P Western Union Paypal Money Gram

Q6: What is your delivery time?
 A:It depends on whether the products you buy is in stock.If in stock, ship it within 1-3days,
      if not, we can discuss and we will arrange your order as soon as possible.

 Q7: What's the warranty of your products? 
A:12 months~18months after shippment.